Electronic Reliability Tutorial Series 2
Electronic Reliability Tutorial Series 2 On-Demand:
How to use Simulation and Modeling techniques to Improve Reliability- These tutorials are available on demand.
- There are 3 tutorials in this series.
- You have 180 days to access each tutorial you register for.
- Registration Fee: $105.00 for each tutorial.
Electronics perform critical functions in every major industry vertical, whether in automotive, aerospace, consumer, medical or industrial segments. With the advent of newer technologies (both at the component and material levels), shrinkage of feature sizes, more stringent environments and sophisticated power requirements, electronics face increasing reliability risks. Supply chain trends have changed over the years from a vertically integrated model to a more geographically diverse supply chain. All these trends have increased reliability risks for companies. However, the cost of reliability assurance activities is often a fraction of the cost of failure, with compounding benefits from conducting these activities early in the design process.
This set of three tutorials will highlight how simulation and modeling can be used to optimize the design, gain assurance of passing qualification tests, and mitigate reliability issues early in the design process.
Solder Alloys and Modeling Solder Reliability for Electronic Assemblies
Abstract: Solder provides the structural and electrical connection between a printed wiring board (PWB) and electrical components. Solder is the most common material used for assembling electronics. However, while most materials only experience elastic deformation during use, solder is also one of the few structural materials that is expected to also undergo significant inelastic deformation during its lifetime.
Both elastic and inelastic deformation damages solder, causing the solder joints to fail, and consequentially the printed circuit assembly to fail. Predicting when the solder joint fails is critical when using solder in harsh use environments. These harsh environments have loads that can come in several forms (i.e., drop/shock, vibration, temperature cycling).
While vibration causes high cycle fatigue of solder, most solder fatigue failures in electronics are thermo-mechanically driven due to temperature cycling which causes significant deformations and stresses due to coefficient of thermal expansion (CTE) mismatches between the PWB and components. To predict solder failure, a damage model must be used that relates deformation of the solder to cycles to printed circuit board assembly failure.
In this tutorial, we will discuss material characterization of various solder alloys, predictive solder fatigue damage models using a physics-of-failure approach (PoF) for printed circuit board assemblies and how to develop damage models using simulation and testing.
Target audience: Engineers involved in the design, simulation and modeling, manufacturing and/or reliability of complex printed circuit board assemblies.
Benefits of attending
- Learn about different solder alloys and their failure mechanisms
- Characterizing solder material properties for simulation and modeling
- Methods for predicting reliability of electronic assemblies
Register!
Printed Circuit Board Level Reliability Testing – Leveraging Testing, Failure Analysis, and Simulation to Improve Reliability
Abstract: Board Level Reliability Testing (BLRT) encompasses a range of environmental stress tests that evaluate the robustness of a semiconductor package once soldered to a printed circuit board (PCB). Solder joint reliability under thermal and mechanical loads has been the focus of BLRT programs, though increasingly other failure modes have also been identified for testing under these programs. While standards from organizations, such as JEDEC JEP150 and AEC Q104 (for automotive), provide guidance for BLRT testing, there is often ambiguity around test coupon design, test conditions, test duration, and failure criteria. This ambiguity can cause confusion, delay, and dissatisfaction up and down the supply chain.
Additionally, finite element modeling (FEM) is often underutilized in BLRT programs. Proactive simulation can be a helpful tool to design for reliability and improve overall BLRT robustness. This tutorial will cover tips for designing an appropriate BLRT program. This includes best practices in BLRT risk assessment, test coupon design, and experimental procedures. It will also review how to leverage simulation to improve BLRT design and performance.
Target audience: Engineers involved in the design, prototyping, qualification, or end use of new electronic package designs
Benefits of attending
- Learn about common failure modes and mechanisms of electronic package assemblies experienced and tested for in Printed Circuit Board Reliability Testing
- Learn about best practices for designing and conducting a board level reliability test program (BLRT)
- Learn how to use simulation to predict qualification test performance and reduce design cycles
Register!
Simulation Techniques to Evaluate ELK Stress During Chip Attach Process and Mitigate Failures
Abstract: Electronic component manufacturing requires a technology to connect a silicon die to a circuit. A popular method to do so is to flip the die and solder it using C4 bumps to a substrate. The substrate is then finished into a component. A major concern for flip chip technology nsion of the silicon die (2-3 ppm/°C) and the substrate (8-15 ppm/°C). The stress in the extreme low-k layers (ELK Stress) causes a brittle fracture).
This workshop is a hands-on tutorial on completing a simulation for this failure mode. The tutorial includes example files, analysis settings and best-known methods. The workshop will rely on the use of Ansys Sherlock, Ansys Mechanical and Ansys SpaceClaim inside the Ansys Workbench environment.
Target audience: Flip chip component designers and integrators, assembly bumping designers and manufacturers, chip attach, packaging and assembly engineers
Benefits of attending
- How to prevent flip Chip packaging and assembly issues
- Prevent ELK cracking problems before design
- Using simulation techniques to drive design for manufacturing (DfM)
Register!